Produse pentru magnet din (49)

The permanent holding magnets achieve a holding force of up to 35,000 N in the de-energized state and are designed for long holding of magnetic workpieces. When the DC-excited coil is switched on, the permanent magnetic field on the holding surface is neutralized and the workpiece to be held can be removed. The electromagnet holds loads even in the event of a power failure and only needs to be energized briefly to release the workpiece. It is characterized by its energy efficiency and high holding forces. Nominal voltage:24 V Duty cycle:100 % Power consumption:6.2 W Diameter:32x40 mm Thermal class:E 120 

The door holding magnets are mainly used as holding devices on fire protection doors. They hold them in place when open. Controlled by a fire alarm or smoke protection control panel, they release the closures by interrupting the power supply in the event of a fire hazard. Product features: - Coil vacuum encapsulated (IP65) - VdS quality-controlled - Tested according to EN1155 & EN 14637 - Optimised design and quality - Accessories: Anchor plate Nominal voltage:24 V Duty cycle:100 % Power consumption:1.5 W Holding force:490 N Design:Aluminium swivel head 450 mm floor mounting  Connection:terminal clamp 

The permanent holding magnet achieve a holding force of up to 3,500 N in the de-energized state and are designed for long holding of magnetic workpieces. When the DC-excited coil is switched on, the permanent magnetic field on the holding surface is neutralized and the workpiece to be held can be removed. The electromagnet holds loads even in the event of a power failure and only needs to be energized briefly to release the workpiece. It is characterized by its energy efficiency and high holding forces. The permanent holding solenoid is available in different sizes with forces between 8 and 3,500 N. Nominal voltage:24 V Duty cycle:0.25 Power consumption:8.9 W Holding force:420 N Design:round Diameter:55x36 mm Holding permanentmagnetic?:Yes  Thermal class:E 120 Connection:free leads 200mm 

Holding magnet for holding or clamping ferromagnetic workpieces. The DC-excited coil achieves a holding force of up to 30,000 N when energized. When the supply voltage is switched off, the workpiece to be held falls off. The holding solenoid is maintenance-free and are characterized by a low operating current at high holding forces. Nominal voltage:24 V Duty cycle:100 % Power consumption:31.4 W Holding force:5000 N Design:round Diameter:170x29 mm Holding permanentmagnetic?:no Thermal class:E 120 Connection:free leads 300mm 

Leichtes, handliches und leistungsfähiges Handjoch für die Magnetisierung von Bauteilen für die Anwendung der Magnetpulverprüfung. Das Handjochmagnet UM der Serie HANSA gibt es in verschiedenen Ausführungen. Sie unterscheiden sich in den Abmessungen des mittleren Polabstandes und in der Schenkellänge. Der Polabstand kann zusätzlich durch das Anbringen von Vorsatzpolen verändert werden. Es gibt Ausführungen für Wechselstrom (AC 230 V, AC 110 V oder mit Traformator AC 42 V) und Gleichstrom. Das Handjochmagnet UM-15 ist standardmäßig mit dreigliedrigen, beweglichen Schenkeln ausgestattet. Mit diesen können Polabstände (Mitte/Mitte) von 95 mm bis 245 mm eingestellt werden. Die Handjochmagnete entsprechen den Anforderungen von ASTM E709-21 und ASTM E1444/E1444M-21. Die Abreißkraft ist >27 kg / >265 N. Damit ist auch die Forderung von ASTM E 709-21 (mindestens 23,0 kg / 225 N) erfüllt.

The door holding magnets are mainly used as holding devices on fire protection doors. They hold them in place when open. Controlled by a fire alarm or smoke protection control panel, they release the closures by interrupting the power supply in the event of a fire hazard. Product features: - Coil vacuum encapsulated (IP65) - VdS quality-controlled - Tested according to EN1155 & EN 14637 - Optimised design and quality - Accessories: Anchor plate Nominal voltage:24 V Duty cycle:100 % Power consumption:1.5 W Holding force:300 N Design:Without base plate  Connection:terminal clamp 

Flat gripper with a neodymium magnet in a rubber-coated steel pot. The housing increases the adhesive force of the permanent magnet. The maximum adhesive force is achieved when the entire surface is placed on a metallic surface. The flat gripper has a threaded pin with an external thread. Design:with threaded pin  Material:Neodym  Force:50 N Diameter:22 mm Height:6 mm Total height:12.5 mm Weight:11 g Thread:M4  Temperature:60 °C Housing:rubber coated 

Flat gripper with a hard ferrite magnet in a steel pot. The housing increases the adhesive force of the permanent magnet. The maximum adhesive force is achieved when the entire surface is placed on a metallic surface. The flat gripper has a 10 mm threaded socket with an internal thread. It is characterized by a force of 125 N. The diameter is 40 mm, the total height is 18 mm. Design:with threaded bush  Material:hard ferrite  Force:125 N Diameter:40 mm Height:8 mm Total height:18 mm Diameter threaded bush:10 mm Thread:M5  Weight:59 g Temperature:200 °C Housing:galvanized 

The door holding magnets are mainly used as holding devices on fire protection doors. They hold them in place when open. Controlled by a fire alarm or smoke protection control panel, they release the closures by interrupting the power supply in the event of a fire hazard. Product features: - Coil vacuum encapsulated (IP65) - VdS quality-controlled - Tested according to EN1155 & EN 14637 - Optimised design and quality - Accessories: Anchor plate Nominal voltage:24 V Duty cycle:100 % Power consumption:1.5 W Holding force:1372 N Design:With base plate, micro switch  Connection:terminal clamp 

Rotary solenoid in cylindrical design with shafts on both sides and return spring. This preferred type is available in small quantities from stock. Further rotation angle, shaft types or other voltages are available on request. You will find more information in the download area. Design:monostable  Rotation angle:45°  Inital torque:3.6 Ncm End torque:9.3 Ncm Return mechanism:Spring return  Housing type:round  Nominal voltage:24 V Duty cycle:100 % Power consumption:10 W Thermal class:B 130 °C  Connection:Leads 20 cm  Dimensions:Diameter 50 / Length 35 mm  Solenoid weight:380 g Dynamic moment of inertia:1.8 x 10^-6 kg m^2 

Rotary solenoid in cylindrical design with shafts on both sides and return spring. This preferred type is available in small quantities from stock. Further rotation angle, shaft types or other voltages are available on request. Design:monostable  Rotation angle:45°  Inital torque:0.18 Ncm End torque:0.44 Ncm Return mechanism:Spring return  Nominal voltage:24 V Duty cycle:100 % Power consumption:3.8 W Thermal class:B 130 °C  Connection:Leads 20 cm 

Flat gripper with a samarium-cobalt magnet in a steel pot. The housing increases the adhesive force of the permanent magnet. The maximum adhesive force is achieved when the entire surface is placed on a metallic surface. The flat gripper has a threaded socket with an internal thread. Design:with threaded bush  Material:SmCo  Force:90 N Diameter:20 mm Height:6 mm Total height:13 mm Diameter threaded bush:8 mm Thread:M4 Weight:16 g Temperature:200 °C Housing:galvanized 

Flat gripper with a neodymium magnet in a steel pot. The housing increases the adhesive force of the permanent magnet. The maximum adhesive force is achieved when the entire surface is placed on a metallic surface. The flat gripper has no hole and is usually glued or pressed in. Design:with threaded bush  Material:NdFeB  Force:60 N Diameter:13 mm Height:4.5 mm Weight:4.5 g Temperature:80 °C Housing:galvanized 

Flat gripper with a neodymium magnet in a steel pot. The housing increases the adhesive force of the permanent magnet. The maximum adhesive force is achieved when the entire surface is placed on a metallic surface. The flat gripper has a 8 mm threaded socket with an internal thread. It is characterized by a force of 140 N. The diameter is 20 mm, the total height of the flat gripper is 15 mm. Design:with threaded bush  Material:NdFeB  Force:140 N Diameter:20 mm Height:7 mm Total height:15 mm Diameter threaded bush:8 mm Thread:M4 Weight:17 g Temperature:80 °C Housing:galvanized 

Flat gripper with a neodymium magnet in a rubber-coated steel pot. The housing increases the adhesive force of the permanent magnet. The maximum adhesive force is achieved when the entire surface is placed on a metallic surface. The flat gripper has a threaded pin with an external thread. Design:with threaded pin  Material:Neodym  Force:180 N Diameter:66 mm Height:8.5 mm Total height:23.5 mm Weight:107 g Thread:M8  Temperature:80 °C Housing:rubber coated 

Rotary solenoids in square design with shafts on both sides and return spring. This preferred type is available in small quantities from stock. Further rotation angle, shaft types or other voltages are available on request. You will find more information in the download area. Design:monostable  Rotation angle:95°  Inital torque:1.8 Ncm End torque:12.7 Ncm Return mechanism:Spring return  Housing type:rectangular  Nominal voltage:24 V Duty cycle:100 % Power consumption:19.2 W Thermal class:B 130 °C  Connection:Leads 20 cm  Dimensions:50 x 50 mm / Length 35 mm  Solenoid weight:570 g Dynamic moment of inertia:4.25 x 10^-6 kg m^2 

Rod gripper with a neodymium magnet in a brass housing. The maximum adhesive force is achieved when the entire surface is placed on a metallic surface. The rod gripper has no thread and is usually glued or pressed in. Design:without thread Material:NdFeB  Force:450 N Height:35 mm Shortened to:7 mm Measure "D":5 mm Weight:132 g Temperature:80 °C Fitting Tolerance:h6 Housing:brass

Rod gripper with a neodymium magnet in a steel housing. The maximum adhesive force is achieved when the entire surface is placed on a metallic surface. The rod gripper has no thread and is usually glued or pressed in. Design:without thread Material:NdFeB  Force:90 N Height:20 mm Shortened to:15 mm Weight:31 g Temperature:80 °C Housing:steel 

Flat gripper with a neodymium magnet in a rubber-coated steel pot. The housing increases the adhesive force of the permanent magnet. The maximum adhesive force is achieved when the entire surface is placed on a metallic surface. The flat gripper has a central internal thread. Design:with threaded pin  Material:Neodym  Force:75 N Diameter:31 mm Height:6 mm Weight:21 g Thread:M5 Temperature:60 °C Housing:rubber coated